Select a Machine to quickly jump down the page.

 

     

 

 

- 24 Inch Hot Knife seal head.

 

- 11 Inch head opening (Max.)

 

- Designed to meet the requirements of users who need multiple unit

  packaging.

 

- Speeds up to 22 packages per minute.

 

- Transfer between the infeed area and sealing area is accomplished

  by a pusher assembly.

 

- Optional rear closing conveyor provides ability to handle small

  packages.

 

- Infeed and sealing area sections are the same height, providing

  extremely smooth transfer.

 

- Sealing jaws are easily raised or lowered to the required height.

 

- Sealing jaws close in approximately the centre of package no

  matter what the product height is.

 

-  Upper and Lower film is supplied from surface unwind systems.

 

- Constructed with tubular steel frame with sheet metal guards and

  panels.

 

- Infeed, discharge, film unwinds are D.C. Permanent magnet.

 

- 110/208V Single Phase, Three Wire 15 Amps 60Hz.

 

- All units are ESA approved by special inspection.

 

- Max. air consumption of 3 CFM @ 75 PSI.

 

 

 

Package Size: Maximum - 15" W x 12" L

 

Film: Maximum - 24"

 

Footprint: 72" W x 63" L (Includes Infeed Conveyor)

 

 

Back to Top

 

 

- 30 Inch Hot Knife seal head.

 

- 15 Inch head opening (Max.)

 

- Optional increased opening to 20".

 

- Optional increased length in-feed conveyor.

 

- Optional print registration.

 

- Designed to meet the requirements of users who need multiple unit

  packaging.

 

- Speeds up to 22 packages per minute.

 

- Transfer between the infeed area and the sealing area is

  accomplished by a pusher assembly.

 

- Optional rear closing conveyor provides ability to handle small

  packages.

 

- Infeed and sealing area sections are the same height, providing

  extremely smooth transfer.

 

- Sealing jaws are easily raised or lowered to the required height.

 

- Sealing jaws close in approximately the centre of the package no

  matter what the product height is.

 

- Upper and Lower film is supplied from surface unwind systems.

 

- Constructed with tubular steel frame with sheet metal guards and

  panels.

 

- Infeed, discharge, film unwind are D.C. Permanent magnet.

 

- 110/208V Single Phase, Three Wire 15 Amps 60Hz.

 

- All units are ESA approved by special inspection.

 

- Max. air consumption of 3 CFM @ 75 PSI.

 

 

 

Package Size: Maximum - 15" W x 12" L

 

Film: Maximum - 30" W x 12" Diameter

 

Footprint: 54" W + (72" infeed conveyor) x 86" L

 

 

Back to Top

 

 

- 30 Inch Hot Knife seal head.

 

- 15 Inch head opening (Max.)

 

- Optional increased opening to 20".

 

- Optional increased length in-feed & discharge conveyors.

 

- Optional separation infeed conveyor.

 

- Optional print registration.

 

- Speeds up to 22 packages per minute.

 

- Sealing jaws are easily raised or lowered to the required height.

 

- Sealing jaws close in approximately the centre of package no matter

  what the product height is.

 

- Upper and Lower film is supplied from surface unwind systems.

 

- Constructed with tubular steel frame with sheet metal guards and

  panels.

 

- Infeed, discharge, film unwinds are D.C. Permanent magnet.

 

- 110/208V Single Phase, Three Wire 15 Amps 60 Hz.

 

- All units are ESA approved by special inspection.

 

- Max. air consumption of 3 CFM @ 75 PSI.

 

 

 

Package Size: Maximum 24" W

 

Film: Maximum - 30" W x 12" Diameter

 

Footprint: 54" W x 90" L (approx.)

 

 

Back to Top